I'm trying to make a map and I have one, very, very large issue. I can't seem to get anything to align vertically very easily at all when using phased physics. It's due to the increments that pressing the bumpers cause you to go up and down. Is there an easier way to get the alignment in phased mode?
You can either use coordinates pressing B, or push in the left thumbstick when tapping the bumpers. Both of those allow for smaller increments of movement.
I know what you're talking about it's very frustrating. Here are the few ways you can try to fix this: 1) Enable alignment adjustment: This seems to pop the block back to standard grid, sometimes I find this puts it in place 3) Go back to free form mode. Take your object and tap the direction/rotation you want gently and a fraction of a second tap to release the object. This will sometimes time just right that the block stops moving when you let go (hopefully in the spot you wanted). Be warned though if you try alignment adjustment after this the block will probably pop into standard grid space again. 4) Release the object and move to a different location, try to align it from a different perspective. 4) Depending on the object try to make a slight angle adjustment to fit it in