BuildAMap.

Discussion in 'Halo 3 Competitive Maps' started by silentPERFECT, Jun 8, 2008.

  1. JJ3672

    JJ3672 Ancient
    Senior Member

    Messages:
    317
    Likes Received:
    0
    Yea, I got the same problem as Fillmore with the gravlift rotating for only a second or so before getting stuck. So, I did the only logical thing: delete it and make something totally different.

    There is now only one weapon holder, and the gravlift points back in the direction toward the crouch tunnel. On the edge of the fence wall, I placed two dumpsters on top of each other, and a rocket launcher on top of the dumpsters. The rocket launcher is set to never respawn, but both dumpsters will respawn after 120 secs or so.

    This means that (since the gravlift can't be destroyed, it will just instantly respawn) two dumpsters will periodically clear out the center platform and any opponents standing there. On both sides I'll probably make some sort of MLG style bases with a couple twists.

    So tell me how it sounds.
     
  2. silentPERFECT

    silentPERFECT Ancient
    Banned

    Messages:
    99
    Likes Received:
    0

    wait it works for me every time?! well since u deleted the other grav lifts it wont work for sure now but make sure u put ur grav lift at 180 respawn and no spawn at start.

    but for the people that downloaded it earlier try destroying the grav lift and see?
     
  3. JJ3672

    JJ3672 Ancient
    Senior Member

    Messages:
    317
    Likes Received:
    0
    No, the switch works perfectly, and there's no problem spawning the second gravlift on top. It just doesn't spin perfectly (which isn't your fault, cause bungie didn't design it that way), and comes to a stop after a second or two.

    The only thing I deleted was the three weapon holders. The switch as you made it is still intact (cept I made it a custom powerup instead of an OS, figured that OS and rockets was overpowered. The one gravlift on top (switch activated) is the one that pushes the dumpsters and rockets down.

    Savvy?
     
  4. silentPERFECT

    silentPERFECT Ancient
    Banned

    Messages:
    99
    Likes Received:
    0
    Ok Ppl I Must Have Messed Up The Spiinning Grav Lift Plz Do Not Download I Will Have The Working One Up Tommorrow
     
  5. Absurdist

    Absurdist Ancient
    Senior Member

    Messages:
    72
    Likes Received:
    0
    Are there any pictures of the grav lift itself? I have no idea how you got one to spin either, great job!!
     
  6. gobbles

    gobbles Ancient
    Senior Member

    Messages:
    586
    Likes Received:
    0
    I have a map I've already been working on that uses a spinning grav lift, but being able to make it spawn would be nice, but you didn't really explain how the switch works in the original post, which would be nice
     
  7. silentPERFECT

    silentPERFECT Ancient
    Banned

    Messages:
    99
    Likes Received:
    0
    OK thx people but u should have read the first post >_> it said do not download that one cause it wasnt working but today i would have it working today. Its Ok now though, it is up and running good and everytime. Please report any problems with the switch to me and ill try and see if i can fix them in any way. THX
     
    #27 silentPERFECT, Jun 9, 2008
    Last edited: Jun 9, 2008
  8. silentPERFECT

    silentPERFECT Ancient
    Banned

    Messages:
    99
    Likes Received:
    0

    No i dont have any of the grav lift but it spawns on top of the double box and u have to arrange 4 weapon holders at the right angle and at the right place :) it took a long time to do
     
    #28 silentPERFECT, Jun 9, 2008
    Last edited: Jun 12, 2008
  9. sgt.pepper

    sgt.pepper Ancient
    Senior Member

    Messages:
    503
    Likes Received:
    0
    i dont really understand but i think i get it and it sounds cool
     
  10. silentPERFECT

    silentPERFECT Ancient
    Banned

    Messages:
    99
    Likes Received:
    0

    haha ok then thx.
     

Share This Page