Poseidon Poseidon is a slayer map floating on water. I'm new at this so I hope I got all the spawning right. It has two basic levels, and there is a soft kill area on a small third level where you can get a rocket launcher by heading into the teleporter in the glass bunker on the second level. This map mostly contains high and/or open ceilings with some cozy hallways and areas to wander through. There is a large round bunker and there are rooms on the 1st and 2nd levels. I created the lifts covered with one way shields so that when you pop up through them you bounce. I thought that would add a fun aspect - shooting at someone right as you come out of the lift while bouncing adds a challenge. You can go up to the second level through the two middle lifts and there is a tower on each side leading up as well. There is a sniper rifle to the left side of the lift farthest from the rock wall. There are some open areas and hallways that would be conducive to a sniper environment, but there are also some decent closed in areas where close quarters combat should be good. The sword is located under a purple light on the second level in a room close to the waterfall side. There is also a gravity hammer in a corner in the tower containing gravity lifts. The shotgun is resting on a piece of glass cover barely coming out of the wall beside the lift entrance farthest from the waterfalls. Any feedback appreciated. Thanks.
This Ain't up to forgehub standards, You have only 24 hrs to post pics or else this will be locked. If you need help on how to embed pics click on this link: http://www.forgehub.com/forum/halo-reach-custom-content/104926-how-post-screenshots.html it shows you step by step on how to do it.
You have one (1) hour to make this post up to Forge Hub standards. These standards include: A thread thumbnail showing your map A description (500 words recommended) Pictures (at least 3 recommended) Any other information you would like to include about the map A screenshot posting guide is found at the link below. http://www.forgehub.com/forum/halo-r...reenshots.html Goodluck! -JGarb