This is a CCS Cruiser, I tryed to make it look like one. Side view front view Armory/main area IMG]http://i56.tinypic.com/118fxi0.jpg[/IMG] The Control Room
Needs to be much bigger imo. Also, needs to be smoother - too many gaps currently. Use the fine tuning within forge.
much to small imo, but its a good start. the interior space you have looks good. some stuff you add for aesthetics are shield door computer screens and maybe a grav lift system that goes up into it. good luck mate!
You seriously need to use the co-ordiantes function. Some of those objects are horribly lined up (e.g. Walls, floor and roof in the armoury and the floor in the control room. If you don't want to bother using the co-ordiantes or you built the entire thing at an odd angle (other than 90 Degrees, making co-ordinates hard to use) at least try using the fine edit tool. Hold down the left stick as you move an object. It really helps. From then on all you need to do is make it bigger and smoother.
Rotation snap? I can never get the object to change at the angle of the rotation snap, it always stays completely still if that's what you mean.
no, not rotation snaps, hit B and go to edit co-ordinates, itll make it so it looks seamless, rather then looking like you tried winging it, and that wasnt intended as an insult or as saying your work so far was bad, its to keep the admins off my back
Yeah, it's been said but you are way out of proportion. Look at how long the ship in the picture is, and look at its general shape. You should try to make it longer and try not to think about the inside of it before you're happy with its general shape outside. You should also look at the big gaps you've left between objects. Not the best forging in my opinion, but keep practicing, it can only get better