Getting out of campaign maps....

Discussion in 'Screenshot Guides' started by DisturbedShifty, Jan 31, 2010.

  1. DisturbedShifty

    DisturbedShifty Ancient
    Senior Member

    Messages:
    176
    Likes Received:
    0
    Can anyone tell me the best way to get out of a campaign map so I can take screen shots of the scenery? More precisely, the high way level in ODST.
     
  2. Orange

    Orange Ancient
    Senior Member

    Messages:
    2,339
    Likes Received:
    0
    1. Start a local Custom Game or a Campaign match.
    2. Reset all of your controller settings to the default.
    3. Press and hold these buttons in this order: LB + RB + A + D-Pad UP + LS . This will toggle Show Coordinates/Camera Mode.
    Then, press and hold LB + RB + LS + RS + D-Pad LEFT during the film. The "[normal]" at the end of the coordinates should change to read, "[pan-cam]". You can also enable Pan Cam by simply viewing any Film Clip that was saved while in Pan Cam. Pan Cam will remain enabled either until you disable it or until your session ends (you exit or turn off the game). The controls in Pan Cam are somewhat altered. The bumpers on the controller are now useless; LT is used to descend and RT is used to ascend. The left stick still controls your movement, but it cannot be used to move vertically even if you are looking upward or downward. Up and Down on the D-Pad will increase and decrease your speed. The ability to control the playback speed and pause the Film is no longer present in the form of a button; pausing must be done using the X-button menu, and playback speed cannot be altered.



    -From halopedia


    After you are in a film with pan cam on then you can alter your speed with /\ and \/ on the d-pad, doing this you can break through elastic barriers, death barriers and invisible barriers by increasing your speed very high.
     
  3. DisturbedShifty

    DisturbedShifty Ancient
    Senior Member

    Messages:
    176
    Likes Received:
    0
    So I have to this part first:
    1. Start a local Custom Game or a Campaign match.
    2. Reset all of your controller settings to the default.
    3. Press and hold these buttons in this order: LB + RB + A + D-Pad UP + LS . This will toggle Show Coordinates/Camera Mode.
    Play the game to the point I want to. Then quit out and goto theater and do the rest of the steps?
     
  4. Orange

    Orange Ancient
    Senior Member

    Messages:
    2,339
    Likes Received:
    0
    Yeah, then turn to pancam in the film and do the rest
     
  5. DisturbedShifty

    DisturbedShifty Ancient
    Senior Member

    Messages:
    176
    Likes Received:
    0
    Sweet. I will have to give that a try when I get home. Thanks Orange.

    Hey Orange. I tired getting that to work, but couldn't. So two questions. Do you know if it works for ODST? and can you post the direct link to where you found that on Halopedia?
     

Share This Page