Ghost Merging Help

Discussion in 'Halo and Forge Discussion' started by Lamplighter331, Dec 19, 2009.

  1. Lamplighter331

    Lamplighter331 Ancient
    Senior Member

    Messages:
    11
    Likes Received:
    0
    Hey all. I just joined Forgehub and I saw the main page article on Ghost Merging and it sounded pretty interesting. I tried it out but I wasted an hour constantly pressing up +a and slamming a double box against another double box. I'm wondering if it's just because I fail, or are other people having this problem as well? Is there a solution to my failing at Ghost Merging? I would appreciate it if you replied as soon as possible.
    Thanks,
    Lamp
     
  2. Ladnil

    Ladnil Ancient
    Senior Member

    Messages:
    1,502
    Likes Received:
    0
    Do the up+x version, and make sure you're host. Once you've got the item list in Spartan mode once, its just a matter of getting the timing down for future attempts.
     
  3. Lamplighter331

    Lamplighter331 Ancient
    Senior Member

    Messages:
    11
    Likes Received:
    0
    I've tried that as well but it just comes up with the item respawn time and not the item list. Thanks for the feedback anyways.
     
  4. Organite

    Organite Journalist
    Senior Member

    Messages:
    1,742
    Likes Received:
    5
    for the up+x method don't have an object in hand.
    as the monitor, press up and x at nearly the same time and you should be in player mode with the object spawn menu displayed.
    any object spawned like this is automatically dummied
    to ghost merge, spawn two of the same dummied objects
    get another object and slap the dummied ones off their spawn points
    set one of the dummied objects to never respawn and grab the other
    wait for the never respawn object to disappear
    set the minimum equal to the maximum of the object your holding
    the object you're holding should be glitched
     
  5. xMLGx InStINcTx

    xMLGx InStINcTx Ancient

    Messages:
    259
    Likes Received:
    0
    i would love to teach you just send me a message if you would like to know

    send a message to me on xbl my gt is the same as this
     
  6. x DREAM 76 x

    x DREAM 76 x New World Man
    Senior Member

    Messages:
    1,102
    Likes Received:
    0
    I just put down two, let's say double walls. Next place the one on the left to never. Make sure the Run Time Max is at zero. Next place wall or any other solid object right below the two double walls. Next look down at the one of the left. Press Up and A at the same time. Next do the same for the one on the right. Next move the object below the two double walls up and against the two double walls. If they both slide forward you did it correct. If only one slides forward just redo the one that doesn't slide forward until they both slide forward. Once they do just then grab the one of the right and hold it up in the air. Wait a few seconds untill the one on the left dissapears. Once it does, go to the Run Time Max and make it as high as it can go. Boom your done!

    Edit: When I say press up, I am talking about the D-pad.
     
    #6 x DREAM 76 x, Dec 19, 2009
    Last edited: Dec 19, 2009
  7. Lamplighter331

    Lamplighter331 Ancient
    Senior Member

    Messages:
    11
    Likes Received:
    0
    I don't understand what you mean when you say 'below'. Are the dummied objects floating?
     
  8. x DREAM 76 x

    x DREAM 76 x New World Man
    Senior Member

    Messages:
    1,102
    Likes Received:
    0
    No. They are flat on the ground. The object at the bottom of them is just to slide them up. Once they both slide up, you did it correct.
     
  9. Lamplighter331

    Lamplighter331 Ancient
    Senior Member

    Messages:
    11
    Likes Received:
    0
    -facepalm- I get it now! Thanks for the feedback :)
     
  10. Noxiw

    Noxiw Ancient
    Senior Member

    Messages:
    1,941
    Likes Received:
    0
    Why is this posted here? We have a brand-new thread, which you say you have read, dedicated to helping people that don't what to do. I realize that you are new here, so you probably didn't know better, but next time, realize that when there is an article posted on the frontpage of ForgeHub, there is a thread for discussion as well. Use the search button please.

    Also, being that you are new, and alot of new members don't read the rules, please read the rules. It'll make ForgeHub more enjoyable for the older members, and make your stay infraction-free.

    Lock please.
     
  11. HaloIlove

    HaloIlove Ancient
    Senior Member

    Messages:
    85
    Likes Received:
    0
    press a and almost instantly d-pad up. What should happen is that the objcts shouldn't move. Then whack em.
     
  12. Lamplighter331

    Lamplighter331 Ancient
    Senior Member

    Messages:
    11
    Likes Received:
    0
    Thanks. I read the rules before, I probably accidently skipped a section. I solved the problem so any mod who comes by please lock/delete.
     

Share This Page