blank fort

Discussion in 'Halo 3 Casual Maps' started by shockwave x93x, Jun 17, 2008.

  1. shockwave x93x

    shockwave x93x Ancient
    Senior Member

    Messages:
    3
    Likes Received:
    0
    the other day i was looking at all of my maps and the were only like 2 fort maps and thay were poorly made so i got the idea of making a blank fort for others to forge on. so here it is you can do wutever you wont to do yo it and all i am asking is for you to includ me in the discripshon as one of the makers OK!!!!!!!!!!!!!


    here is the map
    Bungie.net : Community : Forum Topic Listing : Forum Reply Listing

    here is the pics
    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]
     
    #1 shockwave x93x, Jun 17, 2008
    Last edited: Jun 17, 2008
  2. this is not up to standers
     
  3. IxGUNxSLINGERxI

    IxGUNxSLINGERxI Ancient
    Senior Member

    Messages:
    1,294
    Likes Received:
    0
    Hey glad to see you decided to post you map here on Forgehub but this post unfortunately doesn’t meet the guidelines. This is because it doesn’t have embedded pictures. So what I am going to do is show you how to embedded pictures into your map post on ForgeHub.

    To get you pictures embedded first you have to host them on a picture hosting website. I would use ImageShack® - Image Hosting because it’s the easiest in my opinion.

    1st step is to save the Picture you want to embed from Welcome to Bungie Studios : Hold RB To Ride Brokeback!. To do this just open up the screen shot viewer and right click save image.
    [​IMG]

    2nd step is to locate the file you just saved of Bnet. then after you locate the file host it on Imageshack.
    [​IMG]
    But here is where most people make a big mistake what they do is embed the thumbnail instead of embedding main picture. So what you do to avoid that is click on the picture.
    [​IMG]

    3rd step is to take the picture and embedded into the post it so what you do is copy and paste the direct url. (Look at the picture below to find the location of the direct url) and then to embed it on Forgehub all you have to do is add around the direct URL you just copied and pasted into your post. And it should look like this [​IMG] but without the spaces.
    [​IMG]

    Finished product:
    [​IMG]

    You can also go here for a map posting template to make posting your map a whole lot easier

    If you need any other help fell free to send me a private message Here
     
    #3 IxGUNxSLINGERxI, Jun 17, 2008
    Last edited: Jun 17, 2008
    Beyond Skill198 and TDH like this.
  4. shockwave x93x

    shockwave x93x Ancient
    Senior Member

    Messages:
    3
    Likes Received:
    0
    [​IMG]
     
    #4 shockwave x93x, Jun 17, 2008
    Last edited: Jun 17, 2008
  5. ActTehKiLL

    ActTehKiLL Ancient
    Senior Member

    Messages:
    332
    Likes Received:
    0
    Prolly your first time posting a map. Again you must post your map with the FH Standards you must embed your pictures.

    Embeded pictures: no bad comments
    Hope to see your pictures embeded.
     
  6. XBlackDarknessX

    XBlackDarknessX Ancient
    Senior Member

    Messages:
    149
    Likes Received:
    3
    hey nest time if you could put pictures on the thread not a link to them
     
    Kronos likes this.
  7. Kronos

    Kronos Ancient
    Senior Member

    Messages:
    991
    Likes Received:
    0
    You two above me, he has already been told twice, and got a very thorough explanation on how to fix it. You have no need to post that.
    Anyway, on the map, is it like a fort with nothing in it? That's what I'm getting at from the description, if the fort looks good, this could be cool.
    ________

    Edit: Change the name of your thread to whatever the map name is, it's a rule. If you need help posting this map, other than with pics, (because you've been told how) click the first link in my signature.
     
  8. shockwave x93x

    shockwave x93x Ancient
    Senior Member

    Messages:
    3
    Likes Received:
    0
    haw do you do that
     
  9. Norlinsky

    Norlinsky Guest

    First, go into your original post to edit. There should be an option that says Go Advanced. Click that and the first box to edit should be the name of the map. Just PM me with any questions on how to do this
     
  10. xMBMAxPureEvil

    xMBMAxPureEvil Ancient
    Senior Member

    Messages:
    691
    Likes Received:
    0
    dont use image shack use photobucket it works beter and is easier to use
     

Share This Page