USS Enterprise WIP [Sketchup]

Discussion in 'Halo and Forge Discussion' started by TheGreatHibiki, Aug 14, 2010.

  1. TheGreatHibiki

    TheGreatHibiki Ancient
    Senior Member

    Messages:
    349
    Likes Received:
    0
    In conjuction with my Yamato map is was always my hope that Reach would allow both to be made together well. A pipe dream. So I thought to make both ships as realisticly as possible as a single map and one sided gametypes to be used with them. With the Enterprise I decided to say come what may let's use what we got, even if I can't make it like this in Reach. Using 43 slate walls (uncertain if that amount is allowed) and still more required the Big E is huge. Let Master Chief show you why.
    Profile
    [​IMG]
    By thegreathibiki at 2010-08-14
    The Bow
    [​IMG]
    By thegreathibiki at 2010-08-14
    Further profile
    [​IMG]
    By thegreathibiki at 2010-08-14
     
  2. AwfulDarkJedi

    AwfulDarkJedi Forerunner

    Messages:
    47
    Likes Received:
    0
    Very nice job on making this, it looks very well done. It's a shame you won't be able to build it though :(
     
  3. TheGreatHibiki

    TheGreatHibiki Ancient
    Senior Member

    Messages:
    349
    Likes Received:
    0
    Why do you think I won't be able to build it?
     
  4. AwfulDarkJedi

    AwfulDarkJedi Forerunner

    Messages:
    47
    Likes Received:
    0
    Because there most likely isn't enough slates.
     
  5. TheGreatHibiki

    TheGreatHibiki Ancient
    Senior Member

    Messages:
    349
    Likes Received:
    0
    Update 1: Slimming and tucking. I made the platform above and the lower deck require less slate walls. I also began adding the lower deck walls and some aesthetic changes to better look like the CV-6.

    [​IMG]
    By thegreathibiki at 2010-08-16

    Her Bow (He's still tiny compared.)
    [​IMG]
    By thegreathibiki at 2010-08-16
     

Share This Page